Blending Units
The Blending Units offer flow rates from 20bbl/min to 120bbl/min.The BNCS-II Control System is the key to ensure stable performance and reliable operation. This system can implement auto control of discharge density and various chemical additives via screens from the blender or instrument van. Our hydraulic system is a closed loop type. It is preferred for fast response, low-loss of power and simple maintenance.
|
Blending Unit
|
||
|
Model |
BGT-100 BLENDER |
BGT-75 BLENDER |
|
Maximum discharge rate |
100 bbl/min |
75 bbl/min |
|
Maximum discharge density |
21 lb/gal |
21 lb/gal |
|
Maximum proppant input rate |
21250 lb/min |
16000 lb/min |
|
Size (L×W×H) |
12200×2500×4100 |
12200×2500×4100 |
|
Carrier type |
Truck mounted |
Truck mounted |
|
Chassis |
BENZ 8×6 / Other manufacturers available |
BENZ 8×6 / Other manufacturers available |
|
Engine |
CAT C13 |
CAT C13 |
|
Engine power |
960 HP |
520 HP |
|
Number of liquid additive systems |
Up to 6 |
Up to 6 |
|
Number of dry additive systems |
Up to 2 |
Up to 2 |
|
Discharge centrifugal pump |
12x10 |
10x8 |
|
Suction centrifugal pump |
10x8 |
10x8 |
|
Automatic control system |
BNCS-II for FRAC |
BNCS-II for FRAC |
|
Cold weather pre-heating system |
Optional |
Optional |
|
Blender Skid
|
||
|
Model |
BGS-60 BLENDER SKID |
BGS-35 BLENDER SKID |
|
Maximum discharge rate |
60 bbl/min |
35 bbl/min |
|
Maximum discharge density |
21 lb/gal |
21 lb/gal |
|
Maximum proppant input rate |
12500 lb/min |
7000 lb/min |
|
Size (L×W×H) |
8500×2500×3200 |
8500×2500×3200 |
|
Carrier type |
Skid mounted |
Skid mounted |
|
Chassis |
Not required |
Not required |
|
Engine |
CAT C13 |
CAT C13 |
|
Engine power |
520 HP |
520 HP |
|
Number of liquid additive systems |
Up to 6 |
Up to 6 |
|
Number of dry additive systems |
Up to 2 |
Up to 2 |
|
Discharge centrifugal pump |
10x8 |
8x6 |
|
Suction centrifugal pump |
10x8 |
8x6 |
|
Automatic control system |
BNCS-II for FRAC |
BNCS-II for FRAC |
|
Cold weather pre-heating system |
Optional |
Optional |