Drilling
-
- Drilling Instrument +
- Weight indicator
- Monitoring System
- Mud Pump Pressure Gauges
- Torque Indicator
- Hand pump
-
- DF Handling Tools +
- Manual Tongs
- Elevators
- Slips
- Spiders
- Wrenches
- Iron Roughneck
- Tongs
- Winches
- Casing and Tubing Coupling Bucking Units
-
- Manifolds and Pipes +
- High-Pressure Hoses
- Straight Pipe Assy
- Manifolds
-
- BOP +
- BOP
- BOP Control System
-
- Mud Pump +
- Mud pumps
- Pump Hydraulic End
- Power End
- Pump Accessaries
-
- Solid Control Equipment +
- Shale Shaker
- Centrifugal Pump
- Desander
- Desilter
- Degaser
-
- Drill Bit +
- Roller Cone Bit
- PDC Bit
-
- Drilling Accessories +
- Drilling Tools
- Jarring Tools
- Fishing Tools
- Junk Mills
- Coring Tools
- Bucking Units
- Axial Piston Pump
- Wire NDT Inspection
Introduction：
Drilling Line
Wellserv PEC provides different types of qualified drilling lines, including Seale construction, Warrington construction, Filler construction and Warrington-Seale construction, all meet API 9A standard. An example of our 6x19S +I.W.R.C steel wire rope is shown in below table. For more information, contact us via info@wellservpec.com.
| Cross-Section | Structure | Diameter | |||||||||
|
Wire Pattern | Strand Pattern | mm | in | |||||||
| 6x19S + IWRC | 1+9+9 | 6 -40 | 1/4 - 1-1/2 | ||||||||
| 6x19W + IWRC | 1+5/5+10 | 6 -40 | 1/4 - 1-1/2 | ||||||||
| 6x21Fi + IWRC | 1+5+5F+10 | 13 -44 | 9/16 - 1-5/8 | ||||||||
| 6x26WS + IWRC | 1+5+5/5+10 | 13 -44 | 9/16 - 1-5/8 | ||||||||
| 6x25Fi + IWRC | 1+6+6F+12 | 14 -50.8 | 9/16 - 2 | ||||||||
| Norminal Diameter | Weight | Minimum Breaking Force KN | |||||||||
| mm | in | kg/100m | 1770 Grade | 1960 Grade | 2160 Grade | IPS Grade | EIPS Grade | EEIPS Grade | |||
| 6 | 14.4 | 22.7 | 25.1 | 27.7 | |||||||
| (6.35) | 1/4 | 16.1 | 26.2 | 30.2 | |||||||
| 7 | 19.6 | 30.9 | 34.2 | 37.7 | |||||||
| (7.94) | 5/16 | 25.2 | 40.7 | 46.9 | |||||||
| 8 | 25.6 | 40.3 | 44.7 | 49.2 | |||||||
| 9 | 32.4 | 51 | 56.5 | 62.2 | |||||||
| (9.5) | 3/8 | 36.1 | 58.4 | 67.2 | 73.8 | ||||||
| 10 | 40 | 63 | 69.8 | 76.9 | |||||||
| 11 | 48.4 | 76.2 | 84.4 | 93 | |||||||
| (11.1) | 7/16 | 49.3 | 79.1 | 90.7 | 99.6 | ||||||
| 12 | 57.6 | 90.7 | 100 | 111 | |||||||
| (12.7) | 1/2 | 64.5 | 102 | 118 | 130 | ||||||
| 13 | 67.6 | 106 | 118 | 130 | |||||||
| 14 | 78.4 | 124 | 137 | 151 | |||||||
| (14.3) | 9/16 | 81.8 | 129 | 149 | 165 | ||||||
| (15.9) | 5/8 | 101 | 157 | 183 | 202 | ||||||
| 16 | 102 | 161 | 179 | 197 | |||||||
| 18 | 130 | 204 | 226 | 249 | |||||||
| 19 | 144 | 227 | 252 | 278 | |||||||
| (19.1) | 3/4 | 146 | 228 | 262 | 288 | ||||||
| 20 | 160 | 252 | 279 | 308 | |||||||
| 22 | 194 | 305 | 338 | 372 | |||||||
| (22.2) | 7/8 | 197 | 308 | 354 | 390 | ||||||
| 24 | 230 | 363 | 402 | 443 | |||||||
| (25.4) | 1 | 258 | 399 | 460 | 506 | ||||||
| 26 | 270 | 426 | 472 | 520 | |||||||
| 28 | 314 | 494 | 547 | 603 | |||||||
| (28.6) | 1-1/8 | 327 | 503 | 578 | 636 | ||||||
| (31.8) | 1-1/4 | 404 | 617 | 711 | |||||||
| 32 | 410 | 645 | 715 | ||||||||
| (34.9) | 1-3/8 | 487 | 743 | 854 | |||||||
| 35 | 490 | 772 | 855 | ||||||||
| 36 | 518 | 817 | 904 | ||||||||
| 38 | 578 | 910 | 1010 | ||||||||
| (38.1) | 1-1/2 | 581 | 880 | 1010 | |||||||
| 40 | 640 | 1010 | 1120 | ||||||||
| (41.3) | 1-5/8 | 682 | 1020 | 1170 | |||||||
| 44 | 774 | 1220 | 1350 | ||||||||
| (44.5) | 1-3/4 | 792 | 1350 | 1550 | |||||||
| 45 | 810 | 1280 | 1410 | ||||||||
| (47.6) | 1-7/8 | 906 | 1350 | 1550 | |||||||
| 48 | 922 | 1450 | 1610 | ||||||||
| (50.8) | 2 | 1030 | 1530 | ||||||||
